Remington 700 Stock Upgrade

Last week I spent some time at the range with my father. While his pistol shooting techniques are horrendous, I’ll give him that he knows long guns.
We were shooting out at 200 yards, the new bullets I loaded for my 7mm Rem Mag in my 700 and his Marlin .35.
After a few shots he noticed my stock/barrel was pretty loose and not sturdy. There was just far to much flex for my liking. I took it home, took it apart and found out the SPS Stock from the factory… is just bad.
The fix? About $250 from Midway. A Bell and Carlson M40 Stock.

Before: The original stock on top, B&C M40 on the bottom


I just installed it and I’m impressed. This thing is rock solid. There is no more movement or tweaking.

Removing the stock is just two bolts at the bottom
of the rifle. Remember: the short bolt toward the front.


The Bell and Carlson stock on the left, the SPS factory stock on the right. The Bell and Carlson has aluminum bedding


The hardest part of the install was aligning/mating the magazine well to the action. Its a little tricky.

Stock upgrade complete


I think the new stock increased the length of pull just a bit. It does feel like it has a larger recoil pad. There really is no more movement. It’s a bit heavier.
Hopefully tomorrow I’ll get out and test it!

Midway USA Blemished 7mm Bullets

I ordered these bullets from Midway, because they were cheap. Over 10 cents a bullet less than the usual Hornady SST bullets I load for my Remington 700. ($0.149 cents a bullet) bringing my 7mm 154gr cost per round to 36 cents per shot vs 50 cents per shot.

They look like Winchester Power Point bullets. but I guess they could be anything?

From what I see the only blemish is how the copper jacket is around the lead soft-point. Other than that, they really look fine.

Hornady SST’s(left) vs. Midway Blemished Bullets(right)

I found the bullet length and weight consistant.

And they seemed to load fine. I gave them a CCI Magnum rifle primer,  59 grains of IMR 4831 and seated to 3.240″  Tomorrow I plan on taking them out to the 200 yard range and see how they perform.

Lee Loadmaster Press

My journey with reloading has been rocky. A few squibs, a blown primer, and of course the rounds that just go click instead of a bang. But thats part of the process. I started out just loading .40 S&W, but now I load 9, 45, 7mm, and .35REM.
This is really to outline the pros and cons of the Lee Loadmaster.
First, its the cheapest progressive you can find. With dies, you can find it for under $250. This includes a case feeder, a priming system. and pretty much what you would expect from a progressive.
Cons. Things on a progressive, just go wrong. Often. Sometimes cases don’t get primed, sometimes the press doesn’t index(turn, or cycle to the next ‘station’) sometimes bullets get seated wrong. Or sometimes it just jams and locks up. I really wish it had a light somehow built into the press. I’ve sort of rigged a book light in between the dies and it seems to work.
Most recently the issues I’ve had have been relating to priming/indexing.
If the press doesn’t prime correctly, in my case the primer pin would get stuck in an upward position. I also noticed the primers were getting stuck in between the pin and plastic
1) I sanded the primer trough smooth with very fine grit paper
2) Bent the arm that cases push back upward to get better contact with the case.

You will spend lots of time getting these issues worked out. Lots of time learning on how exactly the press works.
In all fairness Lee puts up many videos to explain how the press works and how to fix common issues. There is a whole site by loadmaster users with videos to fix common issues.
I would suggest you watch all of them while you wait for your press to arrive.
The good thing about Lee is the support. I’ve found e-mail works great to get in contact with them. They usually respond the same day and tell you new parts are on the way.
Common things that break:
Primer System(the plunger/feeder/spring)
Flipper gets worn
Decapping pins

All in all, I’ve loaded well over a thousand rounds on this, its cheap and gets the job done, but does have some issues.

Juggling

Hi, this is Emily. I am blogging about my experiences learning to juggle. This may not sound interesting, but I am (and many can vouch) an exceptionally clumsy and uncoordinated person. People like me should probably not be allowed to try to juggle. But I did. I am by NO MEANS an expert juggler. I am a beginner. But I wanted to share my juggling journey – for no particular reason…maybe I am just excited about potentially being a sweet juggler. Maybe I just want to encourage other clumsy people to take up juggling. Maybe I just like talking about juggling because it is really fun. I don’t really know. But here goes.

To me, juggling has always been very impressive. My dad was the first person I’ve seen do it, and when I did, I thought he was the only person who could do it. “There is no WAY other people have this ability!” Of course, I was a stupid baby at the time and inevitably I realized it is a relatively common skill. I never thought I would be able to do it since I am clinically uncoordinated, so I really never tried. Until recently.
About three weeks ago, I went to see Penn & Teller with Matt and some friends. It was an absolutely amazing show, and after it was done I could not stop thinking about it. Not only was I mesmerized by the illusions, but also I loved seeing Penn juggle. Granted, he was juggling knives, so obviously it was impressive. But it reminded me how intriguing juggling is. A few days after the show I watched a few tutorials on YouTube about how to juggle. I did not have any proper balls, so I found a few spherical cat toys of similar size and weight and went to practicing.
I started practicing with one ball. I would throw it in arch about eye/forehead level back and forth and back and forth over and over and over. You get the point. It seems simple, but getting this part down is crucial.
The next step is to add a second ball. Start with one ball in each hand. You throw one ball to the other hand and right before you catch it throw the other ball to the other hand. This took longer to nail. It was not pretty at first, but one fateful night, I spent about 3 hours doing this pretty much non-stop during a Netflix stand up comedy binge. After that I had it down. Now, juggling tutorials will tell you “Once you can juggle two balls, you’ll be able to juggle three in NO TIME AT ALL!!!!” This is a giant load of falseness…. at least for me it was. I tried that third ball. I tried it with those encouraging words from the YouTube tutorials in my head. “No sweat” I thought “You can juggle two balls like a pro, just add one more. Heck, add two more. Whatever, who cares, I am awesome at this.” Well my overconfident self was in for a world of disappointment when I added that third ball. I soon realized that I am not the juggling prodigy I thought I would be. I was horrible for a few days. Like, it was sad. But I kept on because I really wanted to be able to do it. I finally was able to throw and catch the third ball. But this brought me to the next big juggling hurdle…

HOW DO I DO THE FORTH THROW??? My world was turned upside down. My hands had no idea how to handle this concept. I couldn’t figure out what to do with my hands at the point of catching the third ball. Of course the answer is – Throw the ball in the hand you’re catching the third ball with. But my brain and my motor skills just could not grasp this simple concept of movement. It took a juggling lesson with my dad to finally conquer this beast. It was like magic. I got the feel for what I had to do to make that forth throw. Followed shortly by the fifth, sixth, seventh and eighth throw. I had gotten in the juggling grove and that is where I stand now. I know what movements need to be made, but I am in NO WAY done learning. However, I did buy get some real juggling balls! On some tries, I will have a good run of solid throws and catches, but other times I will just drop everything like a weirdo. I still need a lot of practice to be as good as I want to be. And I am fine with the process taking longer for me since my hand – eye coordination seems to be a tad underdeveloped. I am making progress everyday. And I plan to continue until I can juggle those knives like Penn.